L16 Taguchi Orthogonal Array Experimental Set Up
DOI:
https://doi.org/10.18486/ijcsnt/10.1.126Keywords:
CNC Turning, Taguchi, Grey Relational Analysis, ANOVA, Artificial Neural Network, Surface Roughness, Material Removal RateAbstract
One of the major developments in production engineering over 20 years is the application of numerically controlled machine tools in production. It is for sure that CNC application first started with “AEROSPACE” Industries to manufacture highly complex parts that are made up of light alloys, having a better material removal. In this study the experiment were conducted based on L16 Taguchi orthogonal array. The Taguchi method plus Grey Relational Analysis was utilised for solving multi-optimization criteria and Artificial Neural Network model based on Levenberg-Marquardt backpropagation algorithm is used for prediction purpose.
References
Here are the references with numbering removed and formatting retained:
Sinarvel B et al. Multi objective optimization in turning of EN25 steel using Taguchi based utility concept coupled with principal component analysis. 12th Global Congress on Manufacturing and Management, GCMM 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.237
Singh G et al. Optimization of the machining parameters for surface roughness during turning of Al/SiC/Gr hybrid MMC. International Journal of Engineering and Technology 2013; 2(11).
Mukherjee S et al. Optimization of material removal rate during turning of SAE 1020 material in CNC lathe using Taguchi technique. 12th Global Congress on Manufacturing and Management, GCMM 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.221
Patod SK et al. Optimization of CNC turning cutting parameter for geometrical dimensional accuracy with surface roughness on the nonferrous material applying Taguchi technique. International Journal of Engineering Trends and Technology 2019; 67(12). DOI: https://doi.org/10.14445/22315381/IJETT-V67I12P210
Santosh J et al. Optimization of CNC turning parameters using face centered CCD approach in RSM and ANN-genetic algorithm for AISI 4340 alloy steel. International Journal of Engineering Research & Technology 2021; 2(6). DOI: https://doi.org/10.1016/j.rineng.2021.100251
Saini SK et al. Optimization of multi-objective responses during CNC turning using Taguchi-fuzzy application. 12th Global Congress on Manufacturing and Management, GCMM 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.235
Saini SK et al. Soft computing techniques for the optimization of machining parameters in CNC turning operation. International Journal of Emerging Technology and Advanced Engineering 2014; 4(3).
Li C et al. A method integrating Taguchi, RSM and MOPSO to CNC machining parameters optimization for energy saving. International Journal of Advanced Engineering Research and Studies 2016. DOI: https://doi.org/10.1016/j.jclepro.2016.06.097
Patel MT et al. Optimization of machining parameters for turning different alloys steel using CNC review. International Journal 2014; 3(2).
Tanaji K et al. Enhancement of surface finish for CNC turning cutting parameters by using Taguchi method. International Journal 2014; 3(1).
Magibalan S et al. Experimental study on the cutting surface roughness in CNC turning operations by applying Taguchi’s technique. International Journal of Innovative Research in Science 2015.
Kumar NS et al. Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning. International Conference on Modeling, Optimization and Computing (ICMOC 2012). DOI: https://doi.org/10.1016/j.proeng.2012.06.087
de Agustina B et al. Experimental analysis of the cutting forces obtained in dry turning processes of UNS A97075 aluminum alloys. The Manufacturing Engineering Society International Conference, MESIC 2013. DOI: https://doi.org/10.1016/j.proeng.2013.08.248
Mukherjee S et al. Optimization of material removal rate during turning of SAE 1020 material in CNC lathe using Taguchi technique. Procedia Engineering 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.221
Vasudevan H et al. Grey fuzzy multi-objective optimization of process parameters for CNC turning of GFRP/epoxy composites. 12th Global Congress on Manufacturing and Management, Procedia Engineering 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.228
Jayaraman P et al. Multi-response optimization of machining parameters of turning AA6063-T6 aluminium alloy using grey relational analysis in Taguchi method. 12th Global Congress on Manufacturing and Management, GCMM 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.242
Raykara SJ. Multi-objective optimization of high speed turning of Al 7075 using grey relational analysis. 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering, MESIC 2013.
Noordin MY et al. Tool life of coated carbide cutting tool when turning hardened stainless steel under minimum quantity lubricant using castor oil. 2nd MIMEC 2015, 4–6 February 2015, Bali, Indonesia. DOI: https://doi.org/10.1016/j.promfg.2015.07.097
Aggarwal A et al. Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function. International Journal of Materials Processing Technology 2007; 205. DOI: https://doi.org/10.1016/j.jmatprotec.2007.11.105
Jeffrey JA et al. Effect of turning parameters in cylindricity and circularity for O1 steel using ANN. Materials Today: Proceedings 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Md Ashfaq Hussain, Digamber Benne, Nagraj G, Parameshwar Parameshwar
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
